Argonne National Laboratory

SULI- AMD- Farrell, Mark- 11.18.26

Argonne National Laboratory  •  Lemont, IL (Onsite)  •  4 hours ago
Apply
AI can make mistakes so check important info. Chat history is never stored.

Job Description

Surface Engineering of Drilling Steels for Geothermal Energy and Lithium-Brine Wells (Critical Minerals and Materials)

Geothermal energy and the recovery of lithium from geothermal brines both depend on wells drilled into rock that is hot, chemically aggressive and abrasive. The steels used for drill pipe and well casing are inexpensive and strong, but above about 200 °C in chloride- and CO2-rich brines they corrode, scale and wear, and operators are forced to buy nickel alloys or titanium at many times the cost. Argonne has developed ultrafast boriding (UFB), an electrochemical process that grows a hard, dense iron-boride layer on a steel surface in minutes rather than hours. Under a DOE Office of Geothermal project, Argonne is now testing whether this layer lets ordinary well steels survive geothermal conditions.

The intern will join that project at the point where the first laboratory data are being produced. The work has three parts.

  1. Making and characterizing boride layers. The intern will prepare coupons of the steel grades used in geothermal wells (casing grades such as L80, T95 and P110; drill-pipe grades such as S135 and G105), treat them by ultrafast boriding alongside staff, and characterize the layers by optical and scanning electron microscopy, X-ray diffraction (to identify the FeB and Fe2B phases) and microhardness. A central question is how the chromium and molybdenum content of each steel changes the layer that forms.
  2. Testing in synthetic geothermal brines. The intern will help prepare synthetic brines that reproduce real U.S. geothermal fluids, from dilute Basin-and-Range waters to the hypersaline Salton Sea brine from which lithium is extracted, and will run immersion and electrochemical corrosion tests on treated and untreated coupons. Weight-loss measurements (ASTM G1 and G31 methods), cross-section imaging and surface analysis will show whether, and where, the boride layer protects the steel. Autoclave exposures at elevated temperature and pressure are run by staff; the intern will prepare, document and analyze those coupons.
  3. Building the dataset. Every coupon, process condition and test result will go into a structured dataset. Using Python, the intern will analyze trends in layer thickness, hardness and corrosion rate against alloy chemistry and process parameters and will produce the figures used in project reports. Interns with a computing interest can extend this into a first machine-learning model of layer growth.

By the end of the term the intern will understand how a surface-engineering process is taken from a laboratory demonstration toward field qualification, will have hands-on experience with metallographic preparation, electron microscopy, X-ray diffraction, hardness testing and corrosion test methods, and will have contributed data to a DOE-funded project that reports quarterly to its sponsor. The intern's results will form the basis of the SULI poster and research report, and may be included in a conference paper with co-authorship for substantial contributions.

What the intern will learn

  • Metallography: sectioning, mounting, polishing and etching of hardened steels; layer-thickness measurement
  • Scanning electron microscopy with energy-dispersive X-ray analysis; X-ray diffraction phase identification
  • Microhardness testing and hardness-profile interpretation
  • Corrosion testing by immersion and electrochemical methods; preparation of synthetic brines; cleaning and weight-loss evaluation to ASTM standards
  • Data management and analysis in Python; scientific figure preparation; technical writing for a DOE project
  • How a national-laboratory project is planned, documented and reported

The intern's work connects three national priorities at once: domestic geothermal energy, recovery of critical minerals such as lithium from geothermal brines, and lower-cost materials for harsh environments. The data the intern produces will be used directly in a DOE-funded project and in Argonne's contributions to the Department of Energy's Geothermal Center of Excellence.

Education and Experience Requirements

  • The entirety of the appointment must be conducted within the United States.
  • Applicants must be:

‒ Currently enrolled in undergraduate or graduate studies at an accredited institution.

‒ Graduated from an accredited institution within the past 3 months; or

‒ Actively enrolled in a graduate program at an accredited institution.

  • Must be 18 years or older at the time the appointment begins.
  • Must possess a cumulative GPA of 3.0 on a 4.0 scale.
  • Must be a U.S. citizen or Legal Permanent Resident at the time of application.
  • If accepting an offer, must pass a screening drug test

Job Family

DOE Seasonal Intern

Job Profile

DOE - SULI (Science Undergraduate Laboratory Internship)

Worker Type

Contingent Worker

Time Type

Full time

Scheduled Weekly Hours

40

EEO Information

As an equal employment opportunity employer, and in accordance with our core values of impact, safety, respect, integrity and teamwork, Argonne National Laboratory is committed to a safe and welcoming workplace that fosters collaborative scientific discovery and innovation. Argonne encourages everyone to apply for employment. Argonne is committed to nondiscrimination and considers all qualified applicants for employment without regard to any characteristic protected by law.

Argonne employees, and certain guest researchers and contractors, are subject to particular restrictions related to participation in Foreign Government Sponsored or Affiliated Activities, as defined and detailed in United States Department of Energy Order 486.1A. You will be asked to disclose any such participation in the application phase for review by Argonne's Legal Department.

Argonne National Laboratory

About Argonne National Laboratory

Argonne National Laboratory, one of the U.S. Department of Energy's national laboratories for science and engineering research, employs 3,400 employees, including 1,400 scientists and engineers, three-quarters of whom hold doctoral degrees. Argonne's annual operating budget of around $1 billion supports upwards of 200 research projects. Since 1990, Argonne has worked with more than 600 companies and numerous federal agencies and other organizations.

Argonne's mission is to apply a unique mix of world-class science, engineering and user facilities to deliver innovative research and technologies. We create new knowledge that addresses the most important scientific and societal needs of our nation.

We actively seek opportunities to work with industry to transfer our technologies to the marketplace through licensing, joint research and many other collaborative relationships.

Argonne is managed by UChicago Argonne, LLC, for the U.S. Department of Energy's Office of Science. We are located on 1,500 acres (6.9 sq. km) in southwest DuPage County, Illinois 25 miles (40 km) southwest of Chicago. The site is completely encircled by the beautiful Waterfall Glen Forest Preserve.

Industry
Biotech & Life Sciences
Company Size
1,001-5,000 employees
Headquarters
Lemont, IL
Year Founded
1946
Website
anl.gov
Social Media