Roles & Responsibilities:

• Assembly Quality – Slewing Drive:

• • Ensure 100% compliance to Assembly Work Instructions (WI), torque charts, tightening sequences, and critical-to-quality (CTQ) parameters.
  • Conduct and monitor in-process inspections for sub-assemblies and final assemblies (slewing drive gearboxes, motors, seals, bearings, housings).
  • Verify bearing preload, backlash, endplay, gear meshing, shim thickness, and lubrication levels as per specification.
  • Develop and maintain control plans, inspection standards, and check sheets for slewing drive assembly.
  • Ensure availability, calibration, and correct usage of torque wrenches, dial gauges, feeler gauges, micrometers, and other critical gauges.
  • Support problem-solving (5 Why, Ishikawa, 8D) for assembly defects, leakages, fitment issues, noise/vibration issues, or test failures.
  • Review first-off and special process validation for new assembly setups or engineering changes.

• Painting Quality Assurance:

• • Inspect surface preparation quality: blasting profile, roughness (Ra), cleanliness (Sa), welding spatter removal, burr removal.
  • Verify DFT (Dry Film Thickness), paint adhesion, hardness, gloss, color shade, curing time, contamination, and rust prevention.
  • Ensure correct usage of paint material, hardener ratios, pot life, environmental conditions (humidity/temperature).
  • Approve paint process parameters as per paint system requirements (primer, intermediate, topcoat).
  • Conduct visual inspection as per ISO 12944 / company paint standards.
  • Support paint booth audits, paint consumable control, and rework reduction.
  • Handle painting NCRs, shade deviations, pinholes, orange peel, under-film corrosion, and ensure timely corrective actions.

• Testing & Functional Verification:

• • Ensure functional test compliance for slewing drives:
  • Noise & vibration levels
  • Torque test
  • Leak test / pressure retention
  • Operating smoothness and rotational efforts
  • Support FAT/Pre-dispatch inspection with customer or internal project team.
  • Validate test records and ensure full traceability against serial number and batch code.
    

• Dispatch Quality & Documentation:

• • Ensure 100% inspection of finished goods before dispatch.
  • Verify completeness of:

• • • Serial number tag
    • Inspection reports
    • Painting records
    • Test certificates
    • Packing checklist
    • Torque records

• • Ensure export packing meets customer and internal standards (VCI protection, wooden box spec, moisture control, cushioning, export marking).
  • Conduct final visual audits, dimensional checks, and cleanliness verification before packing.
  • Coordinate with stores and dispatch to ensure zero damage during internal handling or loading.
• Quality System, NCR Handling & Continuous Improvement:

• • Lead or support NCR investigation, root cause analysis and CAPA actions for
  • assembly/painting/dispatch issues.
  • Ensure strict compliance to ISO 9001, ISO 14001, safety rules, and internal QMS.
  • Maintain documents in QMS:

• • SOP/WI updates
  • Inspection reports
  • Calibration records
  • In-process audit findings

• • Drive 5S, kaizen, poka-yoke implementation, and process improvements.
  • Conduct layered process audits (LPA) for assembly and paint areas.
  • Collaborate with design and process engineering for DCR/ECN implementation and validation.
• Cross-functional Coordination:
  • Work closely with:

• • Production & Assembly
  • Paint Shop
  • Planning & Stores
  • Dispatch & Logistics
  • Supplier Quality
  • Design / Engineering
  • Support training of assembly and paint operators on CTQ parameters, quality alerts, defect prevention, and safety.

• Qualification and Education Requirements:
  • B.E./B.Tech in Mechanical / Production / Industrial / Mechatronics Engineering.
  • Strong knowledge of engineering drawing, GD&T, tolerance stack-up, assembly processes, and Minimum 3–6 years’ experience in:

• • Assembly quality (preferably gearboxes, slewing drives, hydraulics, rotating equipment, or precision assemblies)
  • Painting quality inspection
  • Dispatch/final inspection

• • Experience in rotating mechanical assemblies or heavy engineering is strongly preferred.

• Preferred Skills / Special Skills:
  • Technical Skills:

• • Expert in GD&T interpretation
  • Strong knowledge of assembly processes, mechanical fitments, torquing, bearings, lubrication, gear meshing.
  • Knowledge of painting standards (ISO 12944, DFT measurement, adhesion test).
  • Knowledge of ISO 9001, 8D, CAPA, LPA, SPC & MSA basics.
  • Proficiency in reading assembly BOMs, routing, control plans, torque charts.
  • Familiarity with CMM, height gauge, depth gauges, micrometers, bore gauges.
  • Experience in FAT/inspection with customers is an advantage.
  • Digital/Software Skills
  • ERP (SAP / BAAN / Oracle).
  • MS Excel (strong), PowerPoint, Word.
  • Basic CAD reading (SolidWorks/AutoCAD).
  • QMS and digital checklist systems.
  • Soft Skills
  • Strong analytical & problem-solving capability.
  • Good communication with shopfloor and management.
  • Assertive, disciplined, detail-oriented and quality-focused.
  • Ability to train operators and technicians.
  • Good documentation & reporting discipline.

Have we awoken your interest? Then we look forward to receiving your online application. If you have any questions, please contact Saurabh Padmakar Kulkarni.

One Passion. Many Opportunities.